Ghost Immobiliser 2

Protects your vehicle from key cloning and stops thieves from driving it using the keys you originally had. Our latest immobiliser is connected to your vehicle's data network via CAN and the unique PIN code needs to be entered in order for the engine to start.

Ghost, unlike trackers, does not emit radio frequency signals and can't be identified by diagnostic tools. There are also no indicators in the form of LEDs or buttons that give the impression that it is in your van or car.

Anti-key cloning

The Ghost immobiliser was developed to stop key cloning. The device is connected to your vehicle's data network CAN, and creates a unique pin number using the factory buttons on your dashboard and steering. This prevents the thief being able to start your car. If the wrong PIN code is entered, your engine cannot be started, making it impossible for them to leave with your pride and joy.

A ghost immobiliser is a new technology that is extremely hard for thieves to beat. Unlike physical deterrents like wheel locks and steering locks that can be cut off or jacked The bmw x6 ghost installer immobiliser is an invisible electronic device that isn't detected by common thieves since it doesn't emit any radio signals and operates in a silent manner.

This next generation immobiliser is equipped to shield your car from a range of threats including keys that are duplicated, key-hacking, and relay attacks. It also stops the thief from adding a key or replacing your ECU since it will not allow them to start your vehicle without entering the correct PIN.

The ghost immobiliser 2, unlike other immobilisers, it does not require the use of a remote control or key fob to operate. It is deactivable using an app on the smartphone of the driver. This is perfect for the time you have to give your car to valet parking, or for maintenance without key fobs.

The Autowatch ghost installers near me-II represents the latest evolution of Ghost immobiliser. It was designed to make it as easy and convenient to use while remaining as secure as it can be. This is done by integrating the Ghost-II into the vehicle's data network CAN, which means that there are no wires to hide or be easily found. It also has an inbuilt feature that lets you to disarm your Ghost-II by simply connecting to the vehicle's Bluetooth, so you can go out and drive with no hassle.

OBD port hacking

OBD port hacking has become the latest technique used by professional car thieves. Thieves have access to your vehicle's OBD port with no more than a laptop, an app, and a few cables, which can be bought online for less than PS50. Once they have access, they will be able to do anything they like, from resetting your vehicle's fault codes, tuning your car, or stealing it in under a minute.

If you have an ghost immobiliser fitting immobiliser fitted it can stop your car being stolen using this method, by making sure that an unique PIN code sequence is entered alongside the fob of your key in order to start the engine and drive away. It communicates with the vehicle's ECU (Engine Control Unit) by using the CAN Data Circuit. It is not detected by any scanning technology, RF or code grabbing. It has a Service/Valet Mode that allows your vehicle to start without requiring a PIN code.

You'll also require a cable with OBD pins, which are connected to the CAN bus. These cables are available on Amazon/Ebay for around PS50. You'll also require a cable that has OBD pins connected to CAN Bus. These cables can be bought on eBay or Amazon for PS50. The cable has to be spliced into the wiring harness of your car, for example the radio wiring harness.

Once the hacker has access to the OBD port on your vehicle, they can send diagnostics to the system with high baud rates, which will crash the car's CAN and stop the systems from working. This can cause the engine to stop, doors to lock and even the brakes to activate.

No remotes or keys are required.

The car immobiliser is a fantastic piece of anti-theft technology that is used by billions modern vehicles across the globe. An aftermarket immobiliser helps protect your vehicle through the use of engine ECU software that blocks cars from starting when an untrue transponder signal is sent.

However, it can be easy for a thief to get around an immobiliser system when they have access to the code to deactivate it. The batteries in the majority of key fobs can be removed by prying it open and a burglar can employ a simple tool remove the immobiliser's internal circuit board and replace it with a blank. They'll then be able to start your car.

With the TASSA approved Ghost 2 immobiliser, there are no remotes or keys to be purchased. The immobiliser connects to the vehicle's engine ECU (Engine Control Unit) via a discrete, silent data circuit in CAN that is undetectable with diagnostic tools like those used by high-tech thieves. It does not also use a traditional key-fob with LED indicators, which means it is able to go unnoticed at a glance.

You may have to turn off Autowatch's Ghost 2 protection at times like valet parking or a service. The ghost CAN immobiliser has a special mode for this, Autowatch Ghost Installer referred to as 'Service Mode that is activated by a push of an app on your phone. The car can still be operated, but the maximum speed is restricted to 36 mph.

If you'd like more information about the TASSA accredited ghost immobiliser, contact us today to book a demonstration in our workshop. A member of our team will provide a full breakdown of the process and provide you with your owner manuals, installation certification, Ghost 2 emergency card and security assurance.

Simple PIN code change process

Ghost is a new generation device that can secure your vehicle without cutting wires or installing aftermarket key fobs. It connects directly to the vehicle's CAN data network. A personalised PIN is set by pressing buttons on the steering wheel and dash. The device does not emit RF signals, so it cannot be bypassed. This makes it undetectable by sophisticated scanning or code grabbing technology that modern thieves employ.

The PIN code sequence can be altered whenever you wish to block previous drivers and even includes an override code incase of a sequence that is not remembered. The installer will guide you through the process to do this during installation. The system also has a valet mode feature which can be used to temporarily disable the pin input sequence to allow your mechanic or garage can service the vehicle without needing to know the pin code. This is ideal for customers who want to hand over their car for valet parking or service but still don't want to divulge the PIN sequence.

Unlike Thatcham products that require additional key-fobs to operate, ghost installation is a discreet system which takes advantage of the buttons on your car to create an unique and interchangeable PIN code sequence. This sequence is entered using the app on your smartphone, which means there are no additional LEDs being thrown, and your vehicle is protected with no risk of being disabled by hackers or other technology.

Tested for each vehicle

A ghost immobiliser, in contrast to key fobs which require you to press buttons, is discreetly placed under the steering wheel or dash. Only you will know it's there. The device is connected to your vehicle's CAN data network and the personalised PIN code is programmed into it by using the buttons already on your car. The system won't permit your car to start until the code is entered. This means that thieves can't clone the keys of your car or access the OBD to hack into it.

Ghost is a feature that can be found in all vehicles including electric vehicles, motorhomes, vans and bikes. It's also incredibly versatile and can be programmed to turn off in a variety of situations. For example, it can be programmed to go into Valet mode when the car is taken to a valet parking or servicing company. This means that your vehicle can be operated within a set 30mph speed limit and the ghost immobiliser will be activated once it is returned to your property.

Another fantastic feature is that the device can be reset to your personalised PIN code at any point. This is great if you lose the code or if the device becomes unusable.

It is also unnoticed by anyone who doesn't even know what it is. This is because it runs through the buttons that are already on the dashboard of your car and on the steering wheel and utilizes the information they send to recognise the button that was pressed. This makes it a secure and reliable security system that cannot be tampered by RF scanning or jamming, or a door lock pick set.