Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser can safeguard your valuable property from theft. This system is discrete and does not require any additional key fobs.

The device utilizes buttons on your vehicle (steering wheel doors, door panels, and the centre console) to create a unique changeable pin code sequence that can be up to 20 presses. This will then allow the startup of your vehicle.

Simple PIN Code Change Process

Many homeowners are upgrading their security because of the increase in vehicle theft. There are many kinds of security gadgets that are sold aftermarket including tracking systems, alarms and immobilisers. However, not all of them are equally effective in protecting your car. While a tracking system can assist you in locating your car in the case of theft, it can not prevent the crime from happening in the first instance. An immobiliser, on contrary, does exactly what it says on the tin: it shuts down the engine of your vehicle to prevent it from being started. The Autowatch Ghost is one of the most advanced options available, making it almost impossible for thieves to steal your vehicle.

By using the buttons that are already present in your car The ghost device generates a unique sequence which must be entered before the car's engine can start. This can be done using the indicator stalk windows or heater buttons. There is also a mobile application that can be used as an emergency PIN override, allowing the driver to operate their vehicle without the need to use the button sequence. This is especially useful if you need to hand your car over to a valet service or parking since the immobiliser will still be activated and not disabled.

The Ghost is a unique and innovative device which works in conjunction with buttons on your vehicle instead of being a separate device. It is not only an effective deterrent for vehicle theft, but it can also be used on any future vehicles you may own. This makes it a much better investment than a conventional wheel lock.

Small, weatherproof device

The Autowatch ghost installations review Immobiliser is a sophisticated security device that shields your car from key cloning and hacking. It also prevents ECU swapping. It's a weatherproof, tiny device that communicates directly with your vehicle's ECU via the CAN data bus to disable the engine. It can be plugged into the vehicle without the need for additional wiring and has been extensively tested to make sure it is compatible with all vehicles. It is also indestructible to jamming devices that are a common technique used by car stolen with ghost immobiliser thieves to circumvent the immobilisers in place.

The benefit of using CAN data is that it operates in a silent manner in comparison to conventional systems. It cannot be detected using sophisticated RF scanning and code-grabbing technologies, nor can it be recognized by conventional diagnostic tools. The Autowatch ghost doesn't produce LEDs, but instead utilizes the buttons in your vehicle, such as the steering wheel or centre console panels to create a unique, customizable disarm sequence. You can even make this sequence up to 20 presses long to increase security. The iPhone app is limited to one connection, with a unique pairing code for the Ghost. All communication between the two devices is secured.

The Ghost also prevents thieves from stealing an additional key or replacing the ECU to bypass the immobiliser and begin the engine. It will only allow the engine to start only if the correct pin code is entered. It is able to be operated temporarily in valet or service mode (with parameters set, such as a 30mph speed limit) which means you can give your car to valet or service without entering the code.

Each vehicle is tested

The autowatch ghost installation Ghost is a world-first aftermarket immobiliser CANbus. It can be connected to the wiring of your vehicle and to the engine control unit (ECU). The device intercepts signals to prevent your car from starting normally until you enter a specific code. The system can be turned on or off via your smartphone's app, without the need for additional wires.

The standard factory immobilisers work by using a transponder that is integrated into the key. This sends a message to the ECU. The car will start if the correct code is transmitted. If, however, the transponder of a different vehicle is used instead, the immobiliser will not recognise it. This allows the vehicle to be stolen and then started. A South African company that is at the forefront of vehicle safety systems technology has developed the Ghost immobiliser. It shields you from key cloning or hacking, and even key theft. The only way a thief could steal your car is physically towing it away and even then, they wouldn't be able to drive it.

Ghost uses buttons on your vehicle, such as the indicator stalk, the steering wheel, and door panels, to generate an individual PIN code that needs to be entered in order to use your vehicle. This is done without extra hardware, such as key fobs. It can take up to 20 presses. It is also undetectable by diagnostic equipment and does transmit radio frequency signals, so thieves cannot use sophisticated RF scanners or code-grabbing technologies to detect that an installation has been made.

Unlike physical anti-theft devices like wheel locks or clamps, Ghost is hidden within the vehicle to ensure that it can't be taken away or disabled by thieves. It is more difficult to remove than a car alarm, which requires disarming using a button sequence. This makes it a great alternative to a GPS tracker that can assist in locating your car after it has been stolen.

Override of emergency PIN code

You don't have to look long on social media sites to find stories or videos about cars that have been stolen with the most advanced technology tools. This includes key-cloning devices as well as hacking tools that allow them to start the car without your original keys.

Our Ghost immobiliser is designed to stop this and provide you with an extra layer of security to keep your vehicle from being targeted by thieves. It generates a unique pin code by pushing the buttons on your steering wheel, door panel and on the centre console. This unique PIN has to be entered in conjunction with your original key fob to stop the vehicle from getting started. The unique PIN for override is on the black card you will receive after installation and is easy to remember as there aren't any LEDs.

The device is hidden in the vehicle's wiring and doesn't emit any radio signals, which means it cannot be detected by modern thieves with diagnostic software that can detect the type of security system you have installed. This makes it a great alternative to a tracker.

In contrast to other security systems which rely on a relay in the engine bay, these immobilisers using CAN communicate via databus (brand dependent) with the ECU and BCM of the car. This allows them to shut down a vehicle completely, by sending an electronic block to the ECU and engine.

These systems can also be connected to a separate alarm immobiliser, tracker or alarm. This should be decided prior to installation. They are also service/valet mode compatible and are a great alternative to a tracker having your car in for an electrical fault at the dealership.

Service/Valet mode

In recent years there has been an increase in the number of vehicles being stolen with no owner's keys. It is easier than ever to take your joy and pride with the availability of key cloning tools & door lock picks. To combat this we have launched the Autowatch Ghost immobiliser that prevents your vehicle from being driven despite the fact that your keys were cloned or your vehicle has been stolen.

It directly communicates with your car Stolen with Ghost immobiliser's ECU (Engine Control Unit) via the CAN data loop. It is completely silent because it does not utilize radio frequencies or key fobs. It cannot be detected using diagnostics or any other hacking device. It also protects you from introducing an ECU or key to bypass the system since only the PIN code allows the engine to start.

The device is hidden in your vehicle and is accessible via buttons on your steering wheel, the centre console, and door panels. Before you can begin your vehicle, you must enter a unique and reversible PIN code up to 20 digits.

This is the first aftermarket CAN bus immobiliser to be designed to stop your car from being started or driven away without a PIN code being entered first. If the device is in armed and you attempt to drive away, it will display a warning on your dash that will flash on a regular basis for approximately 300m. If you enter your PIN code at this point it will disarm the anti-hijack system and your vehicle will continue to operate as normal. If you don't enter your PIN in this moment, the indicator will continue to flash and require a new PIN every time you attempt to start your car.